Dahle CleanTEC 41614 Cross Cut Shredder
- Sheet Capacity: 25 - 28
- Shred Speed: 26 ft/min
- Category: Office / Department Shredder
- Feed Opening Size: 16"
- Cut Type & Size: Cross Cut, 1/8” x 1 9/16"
- Security Level: P-4
- Bin Capacity: 45 Gallon
Dahle CleanTEC 41614 Cross Cut Shredder is an ideal choice for a business that cares about the office environment and has high shredding requirements. It can take up to 28 sheets in its 16" feed opening and shreds them in particles of 1/8” x 1 9/16” (P-4) at an impressive speed of 26 ft/min. The Dahle ClearTEC comes with an innovative fine dust filtration system which works with the accuracy of 98% and collects dust particles from the cutting cylinders with 98% accuracy and keeps the office environment clean and healthy. The high capacity 45 gallons shred bin of 41614 is installed with sensors that monitor the level of shred and stops the shredder when maximum bin capacity is reached. The CleanTEC41614 also features an automatic oiling system which keeps the cutting cylinders in excellent condition and reduces the risk of paper jams.
The CleanTEC paper shredder comes with one of the most advanced safety system in the industry; its steel reinforced feed opening is thin enough to prevent fingers from entering and also contains electronic sensors that stop the shredder when fingers get too close to the blades. With the added feature of verbal and contact emergency stop, the shredder possesses the ability to immediately stop if the user says the word ‘stop’ loudly or tap the top cover of the machine. To prevent any type of accident from occurring, the 41614 Cross Cut Shredder also comes with another emergency shut off switch at the back of the machine. The simple to use control dial can be used by anyone to perform all basic functions of the shredder. The dial also has an optical indicator that shows the sheet level in the feed opening. The smart power management system of 41614 works in two stages. The sleep mode kicks in after 10 minutes of inactivity and all power consumption gets terminated after the idle time reaches 30-minute mark. This revolutionary system not only decreases the operational cost of the machine, it also conserves energy to keep our environment clean.
Manufacturer | Dahle |
---|---|
Product Name | Dahle CleanTEC 41614 Cross Cut Shredder |
SKU | 41614 |
Weight | 198.0000 |
Category | Department Shredder |
Cut Size (inches) | 1/8 x 1 9/16 |
Cut Type | Cross Cut |
MPN Number | N/A |
Shred Speed (ft./min.) | 26 |
Country of Origin | Germany |
EAN Number | N/A |
Feed Opening (inches) | 16 |
Can Shred | Credit Cards, Paper, Paper Clips, Staples |
Value Added Features | Auto Oiler, Auto Reverse, Safety Feature, SmartPower Energy Management System |
Bin Capacity (gallons) | 45 |
Maximum Run Time (minutes) | No |
Waste Bin type | Pull-out Waste Bin |
Sheet Capacity | 25-28 |
Security Level | 3 |
DIN Security Level | P-4 |
Warranty | 2 Year Parts and Labor Warranty, Lifetime guarantee on cutting cylinders |
Dimensions (H" x W" x D") | 38 x 29 x 20 |
Part Number |
41614 |
||
Feed Width |
16" |
||
Capacity |
25-28 |
||
Security Level |
3 |
||
Shred Size |
1/8" x 1 9/16" |
Features/Capabilities
CleanTEC® |
Yes |
||
Safe Tech |
Yes |
||
ESP |
Yes |
||
SmartPower |
Yes |
||
EvenFlow |
Yes |
||
CDs / DVDs |
Yes |
||
Decibel Level |
54 |
||
Waste Volume |
45 gal |
||
Shred Bag |
704 |
||
Dimensions (W x H x D) |
38" x 29" x 20" |
||