Kobra 400 C2 cross cut shredder is a high volume, high speed shredder that can be shared amongst 15 to 20 people at a workplace. It is an energy smart shredder that conserves energy by going into standby mode when idle. It shreds paper, paper clips, staple pins, credit cards, and optical media. It is a level 4 security shredder providing a good level of protection for disposal of confidential information.
Kobra 400 C2 is an energy smart shredder and automatically goes into sleep mode after few minutes of non-use to save utility costs. It features a heavy duty chain drive system; enabling it to shred through the toughest of jobs. It has a continuous duty motor that will shred continuously without heating up. It automatically stops in the case of paper jams, and then reverses the jammed paper.
Kobra 400 C2 cross cut shredder automatically starts and stops shredding saves utility costs as the shredder doesn’t operate unnecessarily. It also stops shredding when the waste bag is full or when the waste bin door is open. Its design features a form shelf where the documents to be shred can be placed; allowing easy insertion into the feeder. It is mounted on casters for easy mobility.
The Kobra 400 C2 cross cut shredder has a high shred speed of 30 ft./min leaving you plenty of time to complete other tasks.
The Kobra 400 C2 cross cut shredder can shred optical media, credit cards, staple pins, paper clips, and paper. Optical media and paper can be inserted in the same feed opening at the same time to be shredded.
The Kobra 400 C2 cross cut shredder is a continuous duty shredder. It can shred continuously without needing time to cool down. This makes the 400 C2 productive as it can complete many shred jobs in a single run.
Auto Start Stop
The Kobra 400 C2 cross cut shredder automatically starts shredding when it senses material near the feed opening. When the shredding is complete, it turns off the shredder. This prevents the shredder from unnecessarily operating and consuming power.
Large Waste Bin
The Kobra 400 C2 cross cut shredder features a massive 53-gallon waste bin. The excess capacity of the waste bin allows it to keep storing shredded waste without filling up quickly. The waste bag will be able to hold the shreds of more than 1800 shredded paper. This saves on accessories costs by preventing the need to frequently purchase shredder waste bags.
The Kobra 400 C2 cross cut shredder's heavy duty chain drive system enables the 400 C2 to power through tough shredding jobs. The chain drive system makes the 400 C2 a shredder powerhouse as it can shred the hardest of jobs.
The Kobra 400 C2 cross cut shredder features a form shelf at the top of the shredder. You can place the documents to be shredded here, and then organize them so that they can be easily inserted into the feeder.
Like other Kobra shredders, the Kobra 400 C2 cross cut shredder comes with a power saving stand by-mode. After 3-4 minutes of non-use, the power saving Energy Smart system places the shredder in standby mode. This reduces electricity costs and rests the motor.
The Kobra 400 C2 cross cut shredder's cutting blades are made of hardened steel. These steel blades are strong enough to shred paper clips, optical media and other metal objects. These blades will shred for a long time requiring minimal maintenance.
Specifications for Kobra 400 C2 Cross Cut Shredder
|Cut Type||Cross Cut|
|Value-Added Features||Auto Reverse, Auto Start/stop, Jam Prevention Technology|
|Can Shred||Credit cards, Floppy Disks, Optical disks (CDs/DVDs), Paper Clips, Staple pins|
|Security Level||Level 4|
|DIN Security Level (66399)||Level P-5|
|Feed Opening (inches)||16"|
|Bin Capacity (Gallon)||53.0000|
|Shred Speed (fpm)||30|
|Waste Bin Type||Pull-out Type|